Manuflex UNIVERSAL standard basic table, plastic table top, 1750x800, bright blue

The Manuflex UNIVERSAL Standard base table has a depth of 800 mm and is available in three different widths. The Manuflex UNIVERSAL Standard base table is expandable, and the tabletop can be selected to meet your specific needs.
The Manuflex UNIVERSAL Standard base table is the ideal work table for individual use or in rows, and can be expanded at any time. Thanks to its self-supporting steel frame, the Manuflex UNIVERSAL Standard base table is very durable and extremely stable. This frame features a high-quality powder-coated finish and consists of two steel profile frames, two sturdy 60 mm-high side rails, and rubber glides to protect the floor covering. In addition, the base table features a height adjustment mechanism with a clamping screw, ranging from 738 mm to 848 mm, allowing the work table to be individually adjusted for either seated or standing work. The Manuflex UNIVERSAL Standard base table is 800 mm deep and is available in three widths: 1500 mm, 1750 mm, or 2000 mm. Three different tabletops are also available. A detailed description of the tabletops—each 22 mm thick—can be found below. Take advantage of the extensive range of accessories to expand the functionality of your Manuflex UNIVERSAL Standard base table. We are also happy to supply a conductive version upon request.

Further details:

• Intended use: Single or row workbench
• Accessories allow for expansion into a fully equipped assembly or testing workstation
• Extremely stable and durable thanks to a self-supporting steel frame
• Height adjustment via clamping screws from 738–848 mm plus tabletop thickness
• For different working heights during seated or standing tasks
• Frame: consists of 2 steel profile frames (50 x 40 mm) and 2 sturdy, 60 mm-high side rails, as well as rubber feet (6 mm) to protect the floor covering
• The frame features a high-quality powder-coated finish
• Standard depth: 800 mm
• Width options: 1500 mm, 1750 mm, or 2000 mm
• 9 RAL colors available for the frame
• Also available in a conductive version—please inquire
• The tabletop is 22 mm thick and can be ordered in 3 different finishes
• Melamine tabletop finish:

Consists of a melamine resin coating on E1 (Emission Class 1) 3-layer particleboard with a fine texture on both sides
Abrasion- and scratch-resistant as well as non-glare,
The smooth surface is easy to clean
The tabletop is suitable for tasks without high mechanical or chemical demands, such as in shipping.

• Plastic Tabletop Version:

The light gray plastic tabletop consists of easy-to-maintain melamine laminates on an E1 (Emission Class 1) 3-layer particleboard with a counter-laminate, press-bonded
Edged with light gray, impact-resistant plastic edge banding
The surface is easy to clean
Abrasion- and scratch-resistant, durable, and non-glare
The tabletop is suitable for light assembly, shipping, and laboratory work, as well as for tasks that do not require high levels of chemical resistance.

• Multiplex Tabletop Design:

The oiled Multiplex tabletop consists of a beech plywood panel of quality class I/III in accordance with DIN 68705 Part 2
The Multiplex tabletop is cross-glued under high pressure to be water-resistant in accordance with DIN 68705 IF (IW67) and is oiled
. All edges and corners are sanded and chamfered
. A clear lacquer finish on the Multiplex tabletop is available upon request.
The multiplex tabletop is suitable for applications involving high mechanical stress, such as in assembly and manufacturing areas. Due to the gluing process, the tabletop can also be used for occasional work with damp materials.