Manuflex UNIVERSAL special basic table, 1750 x 1000 mm, multiplex natural, bright blue

The Manuflex UNIVERSAL Special base table is available in three widths and with three different tabletops, depending on your needs. The Manuflex UNIVERSAL Special base table has a depth of 1000 mm.
The Manuflex UNIVERSAL Special base table is 1000 mm deep and can be supplied in widths of 1500 mm, 1750 mm, or 2000 mm. The Manuflex UNIVERSAL Special base table is a workbench that, thanks to an extensive range of accessories, can be expanded at any time into a fully equipped assembly or testing workstation. To meet your individual needs, you can also choose from three different tabletops, each 22 mm thick. Further information on these is provided below. The UNIVERSAL Special can be adjusted from 700 mm to up to 1,000 mm using clamping rails. The Manuflex UNIVERSAL Special base table is particularly durable and extremely stable thanks to its two steel profile frames, two sturdy side rails, and high-quality powder coating. A conductive version is also available. Please

contact our customer service for this.

Further details:

• Intended use: Single or row workbench
• Accessories allow for expansion into a fully equipped assembly or testing workstation
• Extremely stable and durable thanks to a self-supporting steel frame
• Height adjustment via clamping screws from 700–1000 mm, plus tabletop thickness
• For different working heights during seated or standing tasks
• Frame: consists of 2 steel profile frames (57 x 43 mm) and 2 sturdy, 60 mm-high side rails, as well as rubber feet (6 mm) to protect the floor covering
• The frame features a high-quality powder-coated finish
• Standard depth: 1,000 mm
• Width options: 1,500 mm, 1,750 mm, or 2,000 mm
• 9 RAL frame colors to choose from
• Also available in a conductive version—please inquire
• The tabletop is 22 mm thick and can be ordered in 3 different finishes
• Melamine tabletop finish:

Consists of a melamine resin coating on E1 (Emission Class 1) 3-layer particleboard with a fine texture on both sides
Abrasion- and scratch-resistant as well as glare-free,
The smooth surface is easy to clean
The tabletop is suitable for tasks without high mechanical or chemical demands, such as in shipping.

• Plastic Tabletop Version:

The light gray plastic tabletop consists of easy-to-clean melamine laminates on an E1 (Emission Class 1) 3-layer particleboard with a counter-laminated surface, press-bonded
Edged with light gray, impact-resistant plastic edge banding
The surface is easy to clean
Abrasion- and scratch-resistant, durable, and non-glare
The tabletop is suitable for light assembly, shipping, and laboratory work, as well as for tasks that do not require high levels of chemical resistance.

• Multiplex Tabletop Design:

The oiled Multiplex tabletop consists of a beech plywood panel of quality class I/III in accordance with DIN 68705 Part 2
The Multiplex tabletop is cross-glued under high pressure to be water-resistant in accordance with DIN 68705 IF (IW67) and is oiled
. All edges and corners are sanded and chamfered
. A clear lacquer finish on the Multiplex tabletop is available upon request.
The multiplex tabletop is suitable for applications involving high mechanical stress, such as in assembly and manufacturing environments. Thanks to its gluing process, the tabletop can also be used for occasional work with damp materials.