Manuflex Profi Spezial Workbench, plastic top, 1250 x 700 mm, red orange

The Manuflex workbench Profi Spezial is 700 mm deep. The Manuflex workbench Profi Spezial can be ordered in four widths and with two table tops.
The Manuflex workbench Profi Spezial has a standard depth of 700 mm. It can be extended to a fully equipped assembly or testing workstation at any time. In this version, the Manuflex workbench Profi Spezial consists of two 57 x 43 mm steel profile frames and two stable, 60 mm high frames. It also has 6 mm rubber shoes to protect the floor covering. The Manuflex workbench Profi Spezial is equipped with a clamping screw, which can be adjusted in height from 700 to 1000 mm. Available in widths of 1250 mm, 1500 mm, 1750 mm or 2000 mm, the Manuflex workbench Profi Spezial has a high-quality powder coating and is particularly stable and durable thanks to the self-supporting steel frame. You receive the Manuflex workbench Profi Spezial with a 40 mm thick table top, which you can choose from two versions. You will find more specific information on these below. We are also happy to supply the Manuflex workbench Profi Spezial in a conductive version on request.

Further details:

• Intended use: single or row workbench.
• Accessories enable extension to a fully equipped assembly or testing workstation
• Extremely stable and durable due to self-supporting steel frame construction
• With clamping screw height adjustment from 700 - 1000 mm plus workbench thickness
• For different working heights for sitting or standing activities
• Frame: consisting of 2 steel profile frames 57 x 43 mm and 2 stable, 60 mm high frames as well as rubber shoes (6 mm) to protect the floor covering.
• The frame is high quality powder coated
• Standard depth: 700 mm
• Also available in conductive version on request
• 9 frame RAL colours to choose from
• Width optionally: 1250 mm, 1500 mm, 1750 mm or 2000 mm
• The table top is 40 mm thick and can be ordered in 2 different versions

Plastic table top version:

The light grey plastic table top consists of easy-care melamine laminates on an E1 (emission class 1) 3-layer chipboard with counter-bonded press-bonded. Edged with light grey, impact-resistant plastic edging. The surface is easy to clean. Abrasion and scratch resistant, hard wearing and glare free. The table top is suitable for light assembly, shipping and laboratory work and for work without higher demands on chemical resistance.

Multiplex table top design:

The oiled multiplex table top consists of a beech multilayer board of quality class I/III in accordance with DIN 68705 Part 2. The multiplex table top is crosswise waterproof glued under high pressure according to DIN 68705 IF (IW67) and oiled in an environmentally friendly way. All edges and corners are sanded and chamfered. A clear lacquering of the multiplex tabletop is possible on request. The multiplex table top is suitable when high mechanical stresses are required, such as in assembly and production areas. Due to the gluing, the table top can also be used for occasional work with damp materials.