Extension table Manuflex UNIVERSAL standard, melamine top, 1500x1000, orange red

The Manuflex extension table UNIVERSAL Standard is 1000 mm deep and is available in three widths. You can also choose from three table tops for the Manuflex extension table UNIVERSAL Standard.
With the 1000 mm deep Manuflex extension table UNIVERSAL Standard you can extend your single or row work table. The Manuflex extension table UNIVERSAL Standard is extremely stable and durable thanks to its self-supporting steel frame and high-quality powder coating. It is also possible to adjust the height of the extension table from 738 mm to 848 mm by means of clamping screws. With its very high load capacity, the Manuflex extension table UNIVERSAL Standard is particularly suitable for high mechanical loads in production or assembly. Accordingly, there are also three different table tops with a thickness of 22 mm to choose from, which you can select individually for your work. You will find the specifications of the table tops below. The Manuflex extension table UNIVERSAL Standard is available in widths of 1500 mm, 1750 mm or 2000 mm. We will also be happy to provide you with a conductive version of the extension table on request.

Further details:

• Intended use: single or row work table
• Accessories enable extension to a fully equipped assembly or test workstation
• Extremely stable and durable due to self-supporting steel frame
• With clamping screw height adjustment from 738 - 848 mm plus table top thickness
• For different working heights for sitting or standing activities
• Due to the very high load capacity (with even load distribution) the table is ideally suited for high mechanical stress in production or assembly
• Frame: consisting of 2 steel profile frames 50 x 40 mm and 2 stable, 60 mm high frames as well as rubber shoes (6 mm) to protect the floor covering.
• The frame is high quality powder coated
• Standard depth: 1000 mm
• Width optional: 1500 mm, 1750 mm or 2000 mm
• The table top is 22 mm thick and can be ordered in 3 different versions
• Melamine table top version:

Consists of a melamine resin coating on E 1 (emission class 1) 3-layer chipboard with fine structure on both sides
Abrasion and scratch resistant as well as glare-free,
The smooth surface is easy to cleanThe table

top is


suitable for work without higher mechanical and chemical requirements, such as in shipping.

• Plastic table top design:

The light grey plastic table top consists of easy-care melamine laminates on an E1 (emission class 1) 3-layer chipboard with counter-bonded press-bondedWith
light grey, shock-resistant plastic edgingThe
surface

is easy to cleanAbrasion


and scratch-resistant, hard-wearing as well as glare-freeThe
table top is suitable for light assembly, shipping and laboratory work and for work without higher requirements for chemical resistance



.

• Multiplex table top design:

The oiled multiplex table top consists of a beech multi-layer board of quality class I/IIIccording to DIN 68705 Part 2, the
multiplex table top is crosswise waterproof glued under high pressure according to DIN 68705 IF (IW67) as well as environmentally friendly oiledAll
edges and corners are sanded and chamferedA
clear lacquer finish of the multiplex table top is possible on request.
The multiplex table top is suitable when high mechanical stresses are required, such as in assembly and production areas. Due to the gluing, the table top can also be used for occasional work with damp materials.